Archive for the ‘Building Accessories’ Category

One of the main segments of the market segment is building the MC – Steel fabricated buildings

Metal Ware

The use of steel in the construction of prefabricated buildings

The concept of “Metal” (the IC) includes a wide range of products, which are sometimes very different among themselves, and combines them only one thing – they’re all made with the use of any metal, both ferrous and nonferrous. In addition, most products are bundled with other materials and a modular design. All items under the term “metal construction” can be divided into the following groups:

Building metal constructions combine in himself all types of metal building frames for any purpose (Roof Trusses, columns, girders, connections, beams, roof structures, canopies, dome construction, etc.)

Protecting designs – galvanized corrugated sheet, sandwich panels, sandwich, window frames and blocks, metal doors and gates, additional elements to them.

Modular buildings or block-containers – all block construction.

Metal work – tanks, tanks and other containers for Read the rest of this entry »


Applying spray foam to the walls of the basement with a closed cell foam which does provide the best tight vapor barrier and insulation system

How to insulate basement walls

Basement wall insulation
Getting a good basement wall insulation is not an easy job work. Basements are a challenge due to high humidity levels. To insulate a basement wall not only need to install insulation, install and need to know to choose the right materials to use.

Details to be taken to avoid moisture in the basement walls:

Do not install the fiberglass insulation into a wall.
* Do not install a layer of polyethylene against a wall followed by the fiberglass insulation.
* Do not install a vapor barrier paint type (DryLok or similar), followed by fiberglass insulation.
Although the wall of the walls apparently is dry, it is not, and condensing vapor will later brings up the molds.

Tips to insulate the walls of a cellar:
Apply spray foam, is to spray the walls of the basement with a closed cell foam. While this method is expensive, does provide the best tight vapor barrier and insulation system. The spray foam is probably the best possible insulation material for basements and damp areas. The spray foam offers several advantages such as additional structural stability, high moisture barrier, easily covers the pipes, cables and other utilities

Install foam panels – If you want to save some money and do it yourself, then you should use the isolating walls of foam boards. The breakdown of the basement wall insulation foam board creates a vapor barrier, along with a good layer of insulation that will Read the rest of this entry »


Polyurethane Foam Spray or by the injection method, provides an excellent isolation.

Polyurethane Foam Spray :

Polyurethane Foam Spray or by the injection method, provides an excellent isolation.

This foam layer can be applied to different surfaces: The application includes tanks, pipes, cold rooms, flotation elements, Construction. It is particularly suitable for ceilings and walls.

The polyurethane is presented as a solution for the construction of new buildings and rehabilitation of buildings, especially in covering these, which is the part where you lose more heat, seal all sorts of irregularities and cracks, leveling inequalities added little weight to the Read the rest of this entry »


NOISE BARRIERS – Panels for sound barriers fixed / mobile and construction / customized

ACOUSTIC BARRIERS

NOISE BARRIERS – Panels for sound barriers fixed, mobile and construction

SILT acoustic barriers, fixed version, are an effective and definitive resolution of the problem of noise pollution in the external environment, usually due to road and rail traffic, or produced by industrial sectors.

The noise barrier formed by silt and metal panels, perforated at the front and containing within Read the rest of this entry »


WPC – A Special technological innovation by waste wood and the development of new alternative…

Saving natural resources by using new alternative wood products.

Mainly uses in kitchen, bathroom facilities – roads and outdoor terrace etc..

Brief Detailed:
1, the WPC is through technological innovation, recycling of waste wood and the development of new alternative wood products. Saving natural resources, not only has a natural wood texture and grain of wood, more water-resistant, corrosion-resistant, waterproof, mildew, are not insects, pollution-free, non-shrinking, easy to process, recyclable technology performance.

2, the entire wood processing and wood production and Read the rest of this entry »


The Construction Professional Card to work plaster coatin, TPC Construction: Gypsum Sheathing


TPC Construction: Gypsum Sheathing

Courses for the Construction Professional Card to work plaster coating

The training content for gypsum sheathing, which module will have a minimum of 20 hours, is outlined as follows:

A. Definition of work.

– Application to vertical surfaces or Read the rest of this entry »


High grade Metal ceilings for commercial Places

Honey-comb Ceiling

Standard of 600X600, 900X900, 600X1200, 1200X1200 mm. Single plate up to 1500X3000 mm, any size can be customized production. Standard thickness of 12 mm, maximum thickness of 75 mm.

Acoustic performance
Fire performance: China Class A (GB8624)

Advantage
Single larger block for large space
Rigidity, excellent flatness, the overall effect
System with the next frame with Read the rest of this entry »


Cement, lime and plaster, materials for excellent grip

In masonry work is very common to use the mortar, a product obtained by mixing one or more binders, sand, water which is characterized by its strength and cohesive strength, and impermeability and stability. Used as a bonding material and bonding the tiles or the making of brick or block walls and wall cladding.

Materials are substances pliable hold that harden when dry, allowing the union of different materials and provides strength and consistency to work.
Basic components of Concrete and Mortar

Cement, lime and gypsum binders form the core group. These binders are mixed with dry materials for new grip material such as Read the rest of this entry »


When summer is in full swing and we have a pool in our garden (Slip flooring for pools)


Pavement skid for the pool

When summer is in full swing and we have a pool in our garden, it is very common for children to spend long hours in the day to play and run around the pool. As one of the biggest concerns with the elderly is falling and that can generate any injury or cut. These are the most typical accidents suffered by a child in a pool either in the Read the rest of this entry »


The floors of printed or stamped concrete, for fabrication purposes

The floors of printed or stamped concrete

The process called patterned concrete, is the technology that molds used to print forms or figures, coloring and hardening, concrete floors in its plastic state. The floor of printed or stamped concrete is a continuous pavement textures and colors to mimic any kind of stone, cobblestone, slate, stone quarry and generally any type of flooring you can imagine, managing such the texture and tone that only professionals can distinguish a concrete form a natural stone.

The mortar is also true colors printed on walls, resulting in an imitation of face brick or other stone model cheaper cost and optimal result in terms of quality and durability are concerned.

Stamped concrete floors are installed on slab or compacted soil, in commercial, residential, industrial and public works such as Read the rest of this entry »


Search




Categories
Bookmarks

Tag Cloud


Fatal error: Call to undefined function circum_add_code() in /home/virtuald/public_html/wp-content/themes/earthbiz/sidebar1.php on line 99